Tarsacci MDT 8000 - Suggested Settings for Stable Work; Settings for Mineralized Salt Water Beach; Settings for Salt Water Beach

U s e r M a n u a l M D T 8 0 0 0 | 21
Suggested Settings for Stable Metal Detector Work
Suggested Settings for mineralized (black sand) salt water beach
 Set the threshold to -2.
 Set the Sensitivity 5.
 Black Sand (BlkS) ON.
 Salt Mode (St) ON.
 Choose the desired Frequency.
 Set the salinity level, if unknown to 28.
 Ground Balance the Detector.
Suggested Settings for salt water beach
 Set the threshold to -2.
 Set the Sensitivity 7.
 Black Sand (BlkS) OFF.
 Salt Mode (St) ON.
 Choose the desired Frequency.
 Set the salinity level, if unknown to 28.
 Ground Balance the Detector or preset the GB to 500.