To Next Page
K
Kevin MckaySep 12, 2025
What to do if the disc is dirty in my Tascam CD-A700?
- CCharles KnoxSep 12, 2025
If your Tascam CD Player disc is dirty, clean the disc surface.
What to do if the disc is dirty in my Tascam CD-A700?
If your Tascam CD Player disc is dirty, clean the disc surface.
How to eliminate noise in the tuner of my Tascam CD Player?
If you're experiencing noise in the tuner of your Tascam CD Player, it might be too close to the tuner. Keep a reasonable distance between them or switch off the power of this unit.
Why is there no program playback on my Tascam CD-A700?
If your Tascam CD Player is not playing programs, the PROGRAM button might not be pressed. Press the button to display PGM.
Warnings about electric shock from internal voltage and damage from moisture.
Instructions against opening covers and using the unit if damaged.
Covers reading instructions, retaining them, and following warnings.
Details on power sources, grounding, cord protection, and servicing referrals.
Information on FDA regulations and classification as a Class 1 laser product.
Precautions against removing protective housing and hazardous radiation exposure.
Connecting LINE INPUT/OUTPUT, CD LINE OUTPUT, and DIGITAL OUTPUT.
Steps for loading discs, playing, stopping, and unloading.
Steps for cassette playback, loading, and the recording process.
Addresses common issues like no power, hum, noise, and remote control problems.
Solutions for CD playback, output, mistracking, and sound issues.
Troubleshooting sound quality, recording, and tape path issues.
General| Type | CD Player |
|---|---|
| Cassette Deck | Yes |
| Digital Output | Coaxial |
| Remote Control | Yes |
| Power Supply | AC 120V, 60Hz |
| CD Player | Yes |
| Playback Formats | CD, CD-R, CD-RW |
| Frequency Response | 20 Hz - 20 kHz |
| Dynamic Range | 90 dB |
| Audio Outputs | RCA |
