Tascam CD-RW901 - 8 Data Settings; Data Communication Setting

TASCAM CD-RW901 35
Data communication setting
By connecting a PC through its RS-232C terminal to
the CD-RW901 through its CONTROL I/O (RS-232C)
terminal, the two units can be linked for data exchange.
Use the following options on the SYSTEM sub-menu to
perform their respective setting.
BAUD RATE
Sets the communication speed of the keyboard.
4800/9600/19200/38400 bps can be selected
(default:19,200).
LENGTH
Commnication word lengrh can be set to either 7 or 8
bits (default:8).
PARITY
Communication partity can be set to NON, EVEN or
ODD (default:NON).
STOP BIT
The data stop bit can be set to either 1 or 2
(default:1).
Use the MULTI JOG dial (or the MENU (+/-) key and
ENTER key) to set the value.
•
•
•
•
8 − Data settings