TASCAM CD-RW901 37
Troublshooting
Symptom Possible cause and remedy
There is no power to the unit. Please check the power cord is properly plugged in.
“Disc Error!” is displayed. The disc may be dirty. Please replace the disc.
Playback is not possible. This may be due to condensation. In this case, remove the disc, turn the
power on and wait a few hours, then try again.
No sound is output. • Confirm the connections with the audio system.
• Check the volume level, and proper amplifier operation.
Recording is not possible. • Confirm the connections with the audio system.
• Adjust the recording level.
• The disc may be for playback only. Please replace with a recordable disc.
Noise or static can be heard. Please re-position the unit away from strong source of magnetism such
as a television.
The CD-RW901 does not retain settings. While settings are retained each time they are made, in some case they
will not be retained when the power is turned off too soon. To prevent
this from happening, do not turn off the power right after making a seting.
9 − Reference and specifications
To Next Page
Loading...
