25
Section 8 : Convenient functions
To search a non-recorded section on a recorded tape, sim-
ply press the F FWD key. When the non-recorded section
is detected, the tape is rewound to the point just before the
non-recorded section and stops.
If the ABS time is recorded, the ABS time can be record-
ed continuously from this non-recorded section when
recording starts.
·When an END ID is recorded, the tape stops at the
beginning of the End ID.
·When a non-recorded section is detected, "- End -" is
shown in the time display.
8-5. Blank search
To Next Page
Loading...
