Need help?Do you have a question about the Tascam TSR-8 and is the answer not in the manual?
General| Brand | Tascam |
|---|---|
| Model | TSR-8 |
| Category | Measuring Instruments |
| Language | English |
Caution against removing covers to prevent electric shock and refer servicing to qualified personnel.
Warning to prevent fire or shock hazard by not exposing the appliance to rain or moisture.
Read, save, and follow all safety and operating instructions marked on the equipment.
Highlights the TSR-8's high performance, 8-track capability, microcomputer control, and servo transport.
Details interfaces for SMPTE/EBU, RS-232C, and remote control units.
Details tape format, heads, motors, speed, input/output levels, and power requirements.
Lists frequency response, THD, signal-to-noise ratio, crosstalk, and erasure figures.
Steps for safely unpacking the TSR-8 and inspecting for shipping damage.
Specifies environmental conditions like temperature, humidity, and magnetic fields for optimal operation.
Instructions for rack mounting and initial system cable connections.
Detailed steps for mounting reels and threading tape through the machine.
Explains the parallel connector for SMPTE/EBU time code and its use with synchronizers.
Details the serial port for RS-232C communication with computers and MIDIIZER.
Explains how to set recording and monitoring levels using an external mixer.
Step-by-step guide to recording the initial track, including setting up record ready mode.
Using Track 8 for MIDI/FSK and SMPTE time code synchronization.
Instructions for cleaning heads, guides, and rollers using recommended cleaners.
Step-by-step guide for demagnetizing the tape heads to prevent noise.
To Next Page
