This instruction manual is intended to familiarize firefighters and maintenance personnel with the operation,
servicing and safety procedures associated with the Ball Intake Valve, Ball Intake Valve RC, Jumbo Ball Intake
Valve and/or Jumbo Ball Intake Valve RC.
This manual should be kept available to all operating and maintenance personnel.
Ball Intake Valve
Ball Intake Valve RC
Jumbo Ball Intake Valve
Jumbo Ball Intake Valve RC
WARNING
Read instruction manual before use. Operation of this device without understanding the
manual and receiving proper training is a misuse of this equipment. A person who has
not read and understood all operating and safety instructions is not qualified to operate
the Ball Intake Valve, Ball Intake Valve RC, Jumbo Ball Intake Valve and/or Jumbo Ball
Intake Valve RC.
INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE
LIA-200 October 19, 2006 Rev 09©Copyright Task Force Tips, Inc. 2002-2006
TASK FORCE TIPS, Inc.
2800 E. Evans Ave, Valparaiso, IN 46383-6940 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
MADE IN USA •www.tft.com
MANUAL:
A1306
®
1-219-462-6161
1-800-348-2686
www.tft.com
Ball Intake Valve
Ball Intake Valve RC
Jumbo Ball Intake Valve Jumbo Ball Intake Valve RC
A1306
®
1-219-462-6161
1-800-348-2686
www.tft.com
OPERATING RANGE:
Pressure Max 250 PSI
Pressure Min Full Vac.
Hydrostatic
Proof Test:
900 PSI
A1306
®
1-219-462-6161
1-800-348-2686
www.tft.com
A1306
®
1-219-462-6161
1-800-348-2686
www.tft.com
Six seconds from
open to close
meets NFPA 1901
slow close requirement.
To Next Page
Need help?
General
