EasyManua.ls Logo

Task Force ZE04 - Working with Detergents

Task Force ZE04
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
WORKING WITH DETERGENTS
Working with detergent ensures a quick soaking of
the dirt, and allows the high-pressure water to pen-
etrate and remove the dirt more effectively. Always
spray detergent on a dry surface, do not pre-soak
area. Wetting the surface rst dilutes the detergent
and reduces its cleaning ability.
To apply detergents you must be operating at low-
pressure. This provides a gentle application of de-
tergent, with the pressure equivalent to a low-set
garden hose. The high-pressure setting is used for
cleaning; you cannot apply detergents when work-
ing at high-pressure. Always test detergent in an
inconspicuous area before use.
CAUTION
Only use cleaning detergents recommended
for this pressure washer.
Fig. 11 Fig. 12
Step 1
Install the adjustable wand into spray gun and twist.
Turn until rectangular tab appears.
Step 2
Set the adjustable nozzle to the low-pressure set-
ting. The nozzle must be set in the low-pressure
position to apply detergent.
Fig. 13
Step 3
Gently pull detergent containers out of its storage position and ll with detergent. Push containers back into
its storage position.

Related product manuals