12
Cleaning the machine
Store the machine
Service, maintenance and care
Maintenance
t Rinse out the solution tank and the spray unit
thuroughly with warm water.
When the cleaning solution dries up, it could cause faults.
Caution:
Never clean the machine with a high water pressure or a water hose.
The ingress of water into the machine might cause considerable damage to
mechanical or electrical parts.
t Wipe down the machine with a moist cloth.
Caution:
Never store machine with mounted tool (such as a brush or pad)!
Could cause damage to floor surface by negligence.
Caution:
Only original spare parts must be used, otherwise Warranties and
liabilities will be omitted!
To Next Page
Loading...
