9
stair transport
t Connect the power plug into the wall socket.
The indicators light up.
t Lead the power cord with your hand.
Make sure that the power cord does not touch the tool.
t Hold on to the machine.
t Push the safety switch and press the actuating lever at
the same time.
By doing this the tool is activated.
t Drive over surface crossing lanes.
We recommend the transporting of the machine up or down steps to be
performed by two people.
t Release the action lever.
t Disconnect the connection to the power socket.
Caution:
There is a risk involved with this kind of transportation through the weight
of the machine!
Slip ups could result in an injury to an individual or damage to the machine.
t To lift the machine, one person must place the hands at
the protecting ring of the brush covering and the other
person at the machine handle.
To Next Page
Loading...
