4
Regularly check the power cord for tearing or aging, and do not put the machine
into operation if it is not in an flawless condition, but have it repaired by an
authorised specialist!
Repairs to mechanical or electrical parts of the machine must only be undertaken
by JohnsonDiversey authorised customer service workshops or experts who are
experienced in all relevant safety regulations.
Min. requirement for the power supply cord H05VV-F3Gx1.5, H07RN-F3Gx1.5 or
SJT3x14 AWG (CAN/US).
Store the machine in a dry, dust-free room with a corrosion-free atmosphere.
The temperature must not fall below +10 °C nor exceed +35 °C. Low temperatures,
damp and dust can significantly reduce the service life of the electrical components.
Only use the machine on level floors or inclines of maximum 2%.
This symbol on the machine indicates that it is not suitable for use on surfaces
with greater inclines.
2%
To Next Page
Loading...
Need help?
General
