Taski ergodisc 1200 User Manual

7
Start up procedure
t Remove the pad.
t Mount or replace the pad and fasten the retainer disk to
it.
Always tighten the retainer disk properly, could cause
damage to the floor when neglected.
t Slowly bring machine into upright position.
t Stand behind the machine.
t Press the adjustment lever at the machine handle and
slowly lower the guide rod until your arms are streched
out (in working position).
t When getting go of the adjustment lever, the guide rod
snaps into place.

Taski ergodisc 1200 Specifications

General

Brand	Taski
Model	ergodisc 1200
Category	Floor Machine
Language	English