4.2 Insert a Memory Card
Pull off the cover on the right side of the camera and insert a Micro SD card into the
slot.
NOTE:
1. We suggest using Class 6 (or higher) Micro SD card for Smooth shooting purpose.
Lower Class of the Micro SD Card may cause the video blur or unavailable.
2. There is only one correct direction to insert the SD Card into the slot. Do not
force the card into the card slot as it may damage both the SD Card and camera.
3. A new Micro SD Card should be formatted before using.
4.3 Charge the battery
Before using the T66 for the first time, please fully charge the battery .
Procedure:
1. Connect the T66 with a charger or device by Micro USB cable .
2. Charging Indicator A turns blue during charging.
3. A complete flat battery takes around 2.0 hours to get fully charged.
The red indicator turns off after the battery fully charged.
4. When the battery is going to run flat, the red indicator A blinks twice a second.
5. Some functions such as Wi-Fi is unavailable if the battery in low condition.
4.4 Insert camera into waterproof case
1. Ensure the case is dry and clean.
2. Insert the camera and make sure the lens fits neatly in the lens cavity.
3. Close the locking clamps.
4. T66 can be mounted using the accessories provided.
To Next Page
Loading...