tau MEC 1000 - User Manual

SCHEDA COMANDO PER UNO/DUE MOTORI 12 V CON ENCODER
STEUERSCHALTTAFEL FÜR EINEN-ZWEI 12V MOTOREN MIT ENCODER
CONTROL PANEL FOR ONE-TWO 12V MOTORS WITH ENCODER
PUPITRE DE COMMANDE POUR UN OU DEUX MOTEURS 12V AVEC ENCODEUR
QUADRO DE MANDOS PARA UNO OR DOS MOTORES 12V CON ENCODER
GUIDA ALL’ INSTALLAZIONE / INSTALLATIONSLEITUNG / INSTALLATION GUIDE
NOTICE D’INSTALLATION / GUIA PARA SU INSTALACION
TAU S.r.l.
Via E. Fermi, 23 - 36066 SANDRIGO (VI) ITALY Tel. 0444/750190 Fax 0444/750376
EMail: info@TauItalia.com
MEC 1000 - 2000
Edizione 01-1999

Summary

Electrical Connections

Rectifier Card Connection Scenarios

Explains connecting the 230V input with or without the rectifier card.

Dip-Switch Setting

Details how to configure dip switches for various functions.

Connections to Terminal Board

Power Supply Connections

Details 12V DC supply and 12V DC dry battery input.

Output Connections

Describes 12V DC outputs for various devices like receivers, motors, lights.

Input Connections

Installation

Installation Guidelines

Provides instructions on card positioning, polarity, wiring, fuses, and earthing.

DIP Switch Programming

DIP-Switch A: Open;Close Push Button with Stop

DIP-Switch A: Photo Device in Opening Phase

DIP-Switch A: Open;Close Push Button in Opening Phase

DIP-Switch A: Automatic Reclosing

Enables or disables automatic gate reclosing after opening.

DIP-Switch A: Slowing Down

DIP-Switch A: Door Delay

DIP-Switch A: Electronic Friction

DIP-Switch B

DIP-Switch B: Memorizing Functions

tau MEC 1000 Specifications

General

Category	Control Panel
Input Voltage	24 VDC
Power Consumption	10 W
Storage Temperature	-20°C to 60°C
Communication Interface	RS-485, Ethernet
Display	7-inch TFT LCD
Certification	CE