Taurus UltraForce TF-UF - Page 19

UltraForce
19
Required parts for step 2:
Step 2: Assembly of rear frame
1. Turn around the rear
frame so that it is on
the auxiliary strut and
the warning notes point
downwards.
2. Place the perforated
cover and the crossbar
on the frame and align
the holes. The warning
notes on the crossbar
should point in your
direction.
3. Attach the parts by
placing the two screws
through the exterior
holes of the crossbar, the
perforated cover and the
frame and tighten with
two nuts.