17
Horizontal adjustment
• Get on the indoor cycle and rotate the pedal crank to the 3-and-9 o‘clock position. The horizontal
adjustment of the seat is correct, when the knee joint of the leg, which points forward, is above the axle of
the pedal.
• Otherwise, get o the indoor cycle to adjust the saddle in horizontal direction forwards or backwards.
Release the adjusting lever of the saddle and push the seat forwards or backwards as required. Fix the lever
then again.
• Do not exceed the adjustments beyond the stop markings.
ATTENTION
• For safety reason, do not pedal backwards while the braking resistance is set.
• The equipment is NOT equipped with a free wheel system. That means: When the ywheel
rotates, the pedals rotate as well. In order to avoid knee injuries, do not try to stop the
equipment by pushing backwards on the pedals. Do not try as well to take your feet from the
rotating pedals. The movement can only be stopped by using the emergency brake or by a
controlled reduction of the cadence.
To Next Page
Loading...