Need help?Do you have a question about the Taylor 358 and is the answer not in the manual?
Crucial safety precautions for installation personnel and machine operation.
Guidelines for selecting and preparing the installation location for the machine.
Requirements for ventilation and clearance for air-cooled units.
Instructions and warnings regarding electrical hookup and grounding.
Procedures for verifying and correcting beater motor rotation direction.
Information about refrigerants, handling precautions, and types used.
Introduction to machine operation, maintenance, and warranty validation.
Disclaimer regarding compressor warranty and refrigerant usage.
Critical safety warnings and guidelines to prevent injury and damage.
Detailed safety instructions for electrical connections, grounding, and wiring.
Safety warnings related to machine operation, cleaning, and environmental factors.
Guidelines for machine placement, temperature, and noise levels.
Identification and part numbers for Model 358 components.
Identification and part numbers for Model 359 components.
Detailed breakdown and part identification for the beater and door assembly.
Identification of included accessories and replacement parts.
Diagram and identification of user interface elements for Model 358.
Diagram and identification of user interface elements for Model 359.
Explanation of the power switch positions and MIX OUT indicator light.
Instructions for using the reset button and the air tube.
Step-by-step guide for assembling the machine parts after cleaning.
Detailed procedure for cleaning and sanitizing the freezer components.
Steps to prime the freezer with mix for initial operation.
Steps for closing the machine and draining product for storage.
Steps for rinsing the machine with water after use.
Procedures for thorough cleaning and brush-cleaning of parts.
Instructions for disassembling the machine for cleaning and maintenance.
Checkpoints for daily cleaning and sanitizing operations.
Steps to address issues related to high bacterial or coliform counts.
Periodic checks for wear and tear on machine components.
Precautions for protecting the freezer during winter or closure.
Solutions for issues like no product dispensing or incorrect product stiffness.
Troubleshooting mix temperature problems and driveshaft binding.
Diagnosing and resolving mix leakage and machine operation problems.
Solutions for issues with product feeding and overall machine operation.
Schedule for replacing wear-and-tear parts based on usage intervals.
Overview of warranty coverage for different equipment parts and periods.
Conditions for warranty validity and common exclusions.
Limitations of the warranty and procedures for legal recourse.
Overview of warranty coverage for genuine Taylor replacement parts.
Conditions required for parts warranty to be valid.
List of conditions and circumstances under which parts are not covered.
Limitations of the parts warranty and legal recourse procedures.
To Next Page
General
