Taylor 390 Service Manual

4.8 BEVERAGE EQUIPMENT:
4.8.6.3 Iced Cappuccino Machine 1 Issue Date: February 21, 2008
Taylor 390 Last Modified: October 31, 2008
4.8.6.3 ICED CAPPUCCINO MACHINE
Taylor MODEL: 390
LOCATION:
Front of House
WHEN CLEANED:
Daily, Weekly, Monthly, Seasonal
TOOLS/SUPPLIES REQUIRED:
• Salmon Cloth
• 2 or 3-Compartment Sink
• Sink Detergent
• Sanitizer
• Food Grade Lubricant (Taylor Lube or Dow Corning 111)
• 2 Clean, Sanitized Pails (one for product, one for cleaning)
• Paper Towel
• Cleaning Brushes
• O-Ring Remover
• Iced Cappuccino Parts Tray
• C-Safe Circuit Breaker Lockout Kit
O-Ring Remover Tool –
TDL Tune-Up Kit #78116
Double Ended – TDL Kit #71092
Use on All O-Rings, All Holes in Metal Parts, O-Ring
Grooves on All Parts, Core in Draw Valve, Prime Plug Port
Hole in Freezer Door, Retaining Pin, Door Stud Nuts.
White Bristle – TDL Kit #71092
Use on Product Entry Ports in
back of Freezer Door, Scraper
Blade, Draw Handle, Drive
Shaft, Drive Shaft Seal
White Bristle (Gong Brush) – TDL #71091
Use on Hopper, Parts Tray, Rear Drip Pan, Beater,
Front Bearing, Front Drip Tray, Freezing Cylinder
Black Bristle – TDL Kit #71092
Use on Rear Shell Bearing

Taylor 390 Specifications

General

Brand	Taylor
Model	390
Category	Freezer
Language	English

Summary

Iced Cappuccino Machine Overview

Tools and Supplies Required

Lists essential tools and supplies needed for operating and cleaning the machine.

Operator Parts Identification

Machine Component List

Detailed list of machine components with item numbers and part numbers.

Beater Assembly Details

Beater Assembly Parts List

Detailed list of components specific to the beater assembly with part numbers.

Machine Operation Controls

Power Switch and Reset Button Functions

Explanation of the power switch positions and the procedure for the reset button.

Mix and Spinner Indicator Lights

Description of the 'ADD MIX', 'MIX OUT', and spinner indicator lights.

Parts Tray Layout Guide

Parts Placement for Cleaning

Visual guide showing correct placement of machine parts in the designated tray during cleaning.

Daily Maintenance Procedures

Daily Cleaning Steps and Notes

Step-by-step instructions for daily cleaning, including notes on lubrication.

Weekly Breakdown Cleaning

Product Draining and Initial Rinsing

Procedure for draining product and initial rinsing for breakdown cleaning.

Hopper and Inlet Cleaning

Instructions for cleaning the mix hopper and mix inlet hole using brushes.

Disassembly Procedure Part 1

Safety Lockout and Torque Arm Removal

Steps for safely locking out the machine and removing the torque arm.

Freezer Door and Torque Assembly Removal

Instructions for removing the freezer door and the torque assembly.

Disassembly Procedure Part 2

Draw Valve, Ice Buster, and O-Ring Removal

Procedure for removing the draw valve, ice buster, and O-rings.

Door Gasket Removal

Instructions for removing the door gasket from the freezer door.

Disassembly Procedure Part 3

Beater Assembly and Cylinder Cleaning

Steps for removing beater assembly and cleaning freezing cylinder interiors.

Drip Pan and Rear Bearing Cleaning

Instructions for removing drip pan and cleaning rear shell bearing.

Cleaning and Assembly Part 1

Scraper Blade Clip and Part Cleaning

Method for removing scraper blades and thorough cleaning of disassembled parts.

Beater Drive Shaft Reassembly

Procedure for reassembling the beater drive shaft with seal and O-Ring.

Assembly Procedure Part 2

Beater Assembly and Torque Installation

Instructions for installing the beater assembly and torque assembly into the freezing cylinder.

Freezer Door Gasket and Bearing Installation

Procedure for attaching the door gasket and front bearing to the freezer door.

Assembly Procedure Part 3

Door, Ice Buster, and Draw Valve Assembly

Steps to assemble the door with ice buster, draw valve, and handle.

Freezer Door Installation and Securing

Procedure for mounting the freezer door onto the unit and tightening fasteners.

Final Assembly and Sanitizing Part 1

Drip Pan and Splash Shield Installation

Instructions for installing the drip pan and splash shield.

Sanitizing Solution Preparation and Use

Steps for preparing sanitizer solution and cleaning the hopper and freezing cylinder.

Sanitizing and Priming Part 2

Exterior Sanitizing and Mix Priming

Procedure for sanitizing exterior surfaces and priming the machine with Iced Cappuccino mix.

Filling Hopper and Setting Freeze Mode

Instructions for filling the hopper and setting the unit to freeze for serving viscosity.

Monthly Maintenance

Bearing Wear Check and O-Ring Replacement

Routine checks for rear shell bearing and replacement of worn O-rings or seals.

Semi-Annual Maintenance

Tune-Up Kit Installation and Schedule

Guidelines for installing tune-up kit parts twice annually, including component list.

Scraper Blade and Brush Maintenance

Instructions for rotating scraper blades and inspecting cleaning brushes.