EasyManua.ls Logo

Taylor 359 - Model 359 Specifications

Taylor 359
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Models 358 & 359
Introduction
140219
Model 359 Specifications
S Freezing Cylinder - Two; 7 quart (6.6 liter)
capacity.
S Mix Hopper - Two; 20 quart (18.9 liter)
capacity. Refrigerated and insulated.
S Beater Motor - Two; 1.5 hp.
S Refrigeration Unit - Two; approximately
9,500 btu/hr compressors. Refrigerant 404A.
S Electrical - Standard is 208/230-60-3;
however, other electrical characteristics are
available.
Each unit requires electrical service.*
Maximum Fuse Size: 35A
Minimum Circuit Ampacity: 30A
*For exact electrical information, always refer
to the data label of the unit.
S Air Cooled - Clearance: 3” (76 mm) around
all sides.
S Dimensions -
Width: 26” (660 mm)
Depth: 32-3/8” (822 mm)
Height: 55-7/8” (1418 mm)
Floor Clearance: 4-1/4” (108 mm) mounted
on standard casters.
S Approximate Weights -
Net: 580 lbs. (263.1 kgs.)
Crated: 673 lbs. (305.3 kgs.)
Volume: 41.1 cu. ft. (1.16 cu. m.)
Availability and specifications subject to change
without notice.
Figure 2
https://appliancetechmanuals.com

Other manuals for Taylor 359

Related product manuals