Taylor 390 Operator's Manual

13
Model 390 Operating Procedures
Disassembly
BE SURE THE CONTROL SWITCH IS IN
THE “OFF” POSITION. Failure to do so may cause
injury from electrocution or hazardous moving parts.
Step 1
Remove the handscrews, freezer door, baffle
assembly, beater assembly, scraper blades, and drive
shaft from the freezing cylinder . Take these parts to the
sink for cleaning.
Step 2
Remove the front drip tray and splash shield and take
them to the sink for cleaning.

Taylor 390 Specifications

General

Brand	Taylor
Model	390
Category	Freezer
Language	English