Taylor 741 - Section 9: Parts Replacement Schedule

Section 9
9-1
Models 702/741/772
Parts Replacement Schedule
9
Parts Replacement Schedule
Table 9-1
Part Description Every 3 Months Every 4 Months Every 6 Months Annually
Scraper Blade X
Drive Shaft Seal X
Drive Shaft O-ring X
Freezer Door Gasket X
Front Bearing X
Draw Valve O-rings X
White Bristle Brush, 3” x 7” Inspect and replace if
necessary.
Minimum
White Bristle Brush, 9/16” x
38”
Inspect and replace if
necessary.
Minimum
White Bristle Brush, 1-1/2” x
2”
Inspect and replace if
necessary.
Minimum
Black Bristle Brush, 1” x 2” Inspect and replace if
necessary.
Minimum
Double-Ended Brush Inspect and replace if
necessary.
Minimum