Models 8752, 8756, & 8757 Table of Contents
Table of Contents − Page 2
Draining Product From the Freezing Cylinder 33.............................
Rinsing 33..............................................................
Cleaning 33.............................................................
Disassembly 34..........................................................
Brush Cleaning 34.......................................................
Check Topping Pump Temperature and Volume − Model 8757 35..............
Section 7 Important: Operator Checklist 37..............................
During Cleaning and Sanitizing 37.........................................
Troubleshooting Bacterial Count 37........................................
Regular Maintenance Checks 37...........................................
The Air/Mix Pump 38.....................................................
Winter Storage 38........................................................
Section 8 Troubleshooting Guide 39....................................
Section 9 Parts Replacement Schedule 44...............................
Section 10 Limited Warranty on Equipment 45............................
Section 11 Limited Warranty on Parts 47.................................
Note: Continuing research results in steady improvements; therefore, information
in this manual is subject to change without notice.
Note: Only instructions originating from the factory or its authorized translation
representative(s) are considered to be the original set of instructions.
E 1999 Taylor Company (Original Publication)
(Updated July, 2016)
028752−M
Any unauthorized reproduction, disclosure, or distribution of copies by any person of any portion of this work
may be a violation of Copyright Law of the United States of America and other countries, could result in the
awarding of Statutory Damages of up to $250,000 (17 USC 504) for infringement, and may result in further
civil and criminal penalties.
All rights reserved.
Taylor Company
750 N. Blackhawk Blvd.
Rockton, IL 61072