Taylor C602 Replace

Replace syrup pump tubes Annually SS 1 A1
©McDonald’s Corporation · Planned Maintenance Manual · Revised April, 2010 Page 1 of 4
Taylor Company Milkshake and Soft-serve Machine Model C602
Annually SS 1 A1
Why
To break the bacteria cycle and to ensure proper flow of syrup to the draw valve
Time required
5 minutes to prepare 20 minutes to complete
Time of day
At open For 24-hour restaurants: during breakfast menu
Hazard icons
Tools and supplies
Bucket, SolidSense™ All
Purpose Super
Concentrate (APSC)
Bucket, KAY-5®
Sanitizing Solution
Bucket, plastic Bucket, clean and
sanitized towels
Bucket, soiled towels Plastic wrap Pump tube
Taylor Lube HP
Procedure
1
Remove syrup feed tube and
syrup jug.
Open the cabinet door. Re-
move the syrup feed tube
from a syrup jug. Wipe the
outside of the feed tube with a
clean, sanitized towel.
Remove the syrup jugs from
the cabinet.
Sanitizing Solution
2
Cover jug with plastic wrap.
3
Place syrup feed tube in
SolidSense APSC solution.
Place the syrup feed tube in a
bucket of APSC solution.
APSC Solution
4
Place empty bucket under
milkshake draw valve.
Place a clean plastic bucket
under the milkshake draw
valve.
5
Remove syrup line from
milkshake freezer door.
Disconnect the corresponding
syrup line from the milkshake
freezer door by raising the
syrup valve retainer. Pull the
valve straight out.

Taylor C602 Specifications

General

Brand	Taylor
Model	C602
Category	Ice Cream Maker
Language	English