24
Controls
Models C706 & C707
Troubleshooting the Power Board
Use this troubleshooting guide before or immediately
after the suspected assembly is removed from the
equipment in order to determine if the power board is
defective.
The Power Board can be identified by its fuse, several
small relay boxes, and a label that identifies it as Taylor
Part No. 032326--27. You will need a volt--ohmmeter to
check the Power Board.
DANGER: Hazardous line voltage may be
present on and around the power board while power is
applied to the freezer! Failure to follow this instruction
may result in electrocution.
To Next Page
Loading...
