Taylor C706 - Mix Pump Operation

29
Models C706 & C707
Controls
Mix Pump Operation
The pump operates under the following conditions:
Pump Key
When the PUMP key is pressed, the pump is active by
itself or with the WASH mode of operation.
Mix Pump
The mix pump will be active for 30 seconds whenever
the AUTO mode is entered. If a MIX OUT condition
forces a side of the machine into the STANDBY mode
of operation, the mix pump will not be active.
Mix Pump Draw Timer
During the AUTO mode, the mix pump will operate for
10 seconds after every draw of soft serve product.
1
2
5
2A
7
3
6
8
2B
4
ITEM DESCRIPTION PART NO.
1 SCREW-1/4-20 x 3/4 020128-2
2 MOTOR--REDUCER (50/60) 036955-34
2A MOTOR 049246-34
2B GEAR (50/60 HZ) 049247-34
3 MOUNT --MOTOR 036934
4 SLEEVE A. --MIX PUMP X45012
5 COUPLING--MOTOR--FLEXIBLE 047936
6* SEAL--INPUT 048836
7* SEAL--OUTPUT 048837
8 NUT --PUMP SLEEVE 036933
*NOT SHOWN
Optional Overrun Valve Caps
Change the valve cap if dif ferent overrun is required for
local customers or mix formulations:
PART NUMBER TARGET OVERRUN
056874--8 40%
056874--9 43%
056874--10 48%
056874--11 53%
056874--12 55%
056874--13 58%