23
2. Pressing will display a heat up timer. See
Figure 14.
Figure 14
3. This timer will remain in place until the grill
reaches set point.
Note: The current product is displayed under the
“On Not Ready too cool” title. If the selected
product needs to change, press the Change Product
key. This will display the available Recipe
items that can be selected. See Figure 15.
Figure 15
4. If a product is not selected within 10 seconds, the
screen will go back to the Heat up/Cool down
timer.
5. Once the grill reaches the desired set point, the
Auto Calibration screen (See Figure 37.) will
appear for 40 seconds and then close. The screen
will then display the following. See Figure 16.
Figure 16
6. Press the Menu key to display the Menu
screen. See Figure 17.
Figure 17
7. The menu screen appears below. See Figure 18.
Figure 18
To Next Page
Loading...
Need help?
General
