71
27. Remove and empty the grease trough. Rinse and
replace it. See
Figure-189.
Figure-189
28. Reinstall the upper and lower release sheets (see
O&T Manual or Grill Cleaning Kay Card for details).
See
Figure-190.
Figure-190
29. Once the grill pad has cooled, remove; wash and
rinse it thoroughly at the three-compartment sink. Flip
the grill pad over and reinstall it on the tool for the
next grill cleaning.
30. Wash, rinse, and sanitize all of the utensils and tools
used to clean the grill at the three-compartment sink.
To Next Page
Loading...
