TO THE OPERATOR
2-3
Model L850, L852, L858 Series
To the Operator
2
5. Select the product icon you wish to run -lay down
product and press the green button. After cycle is
complete and platen raises, remove product.
Figure 2-6
Figure 2-7
The platen will lower, and the product will begin to cook.
The countdown timer will then appear.
Cleaning After Each Run of Product
1. Using the grill scraper, scrape the grease on the
lower grill surface from front to back. Do not scrape
across the rear of the lower grill surface with the grill
scraper.
Figure 2-8
2. Use the wiper squeegee to clean the release sheet
on the upper platen. Hold the handle at a slight
upward angle. Use a downward motion to clean the
sheet.
Note: Do not use excessive pressure when wiping the
release sheet with the squeegee, since this can scratch
or tear the release sheet.
Figure 2-9
3. Using the wiper squeegee push the grease at the
rear of the lower grill surface into the grease can. Do
not use the grill scraper for this step.
To Next Page
Loading...
Need help?
General
