What to do if the grease drawer on my Taylor QS11 Grill won't close?
If the grease drawer of your Taylor Grill will not close, it's likely due to product buildup in the back of the grease partition. Refer to the “Cleaning the Grease Tray Partition” instructions.
Why is my Taylor QS11 not heating up?
If your Taylor Grill isn't heating, there are several things you can check: * First, ensure the power cord is properly connected. * Next, check if a circuit breaker has tripped and reset it if necessary. * Also, verify that the power switch is in the ON position. If these steps don't resolve the issue, the power switch, relay, or relay board might be faulty, and it's best to contact a service technician.
How to fix undercooked or overcooked food on Taylor QS11 Grill?
If your product is undercooked, overcooked, or cooking unevenly on the Taylor Grill, consider the following: * Replace the release material sheet if it's worn. * Adjust the cooking time, temperature setting, and gap as needed. * Ensure the correct item is selected and the temperature is properly calibrated. * Make sure the cook surfaces are parallel; otherwise, contact a service technician or refer to the leveling procedures. * Load and remove the product in the same order, ensuring it's fully under the top plate. Also, make sure that you followed closing procedures to remove carbon build-up. If a heat zone isn't heating, contact a service technician.
General| Model | QS11 |
|---|---|
| Category | Grill |
| Type | Gas Grill |
| Power Source | Gas |
| Fuel Type | Propane |
To Next Page
