2
To the Installer
Models QS11 & QS23
060504
Installation of Cable Kit
Kit A.-3 Ft. Restrain Cable (part no. 074948) must be
installed to limit the movement of the grill. This is
necessary in order to protect the electrical conduit
from stress. The cable is made of flexible conduit.
To install the kit, look at the back of the unit. There is
a 1/2” hole on the left side of the frame, about half way
down. Remove the plug and attach the cable.
Ventilation and Clearance
To ensure proper operation of this appliance it must be
installed so that products of combustion are efficiently
removed. Do not store anything on top of the grill.
Most service can be performed from the front of the
grill. When inspecting heating elements, the unit must
be disconnected and pulled out of the hood enclosure.
Allow four feet in front of the appliance for this purpose.
To Next Page
Loading...
Need help?
General
