23
Models QS11 & QS23 Operating Procedures
Step 4
Raise the upper cook surface and assure that the
release material sheet fits evenly from front to back,
and snugly on the upper cook surface. (Rotate the
release material sheet on an every other day basis.)
Note: Replace release material sheets if small
pinholes develop.
CAUTION: Release material sheets must be
replaced if:
S Release material is torn.
S Release material substance is worn from the
release material sheet.
S Product sticks to the release material.
S Release material has holes in it.
Figure 21
To Next Page
Loading...
