23
Model SB25
Controls and Systems
Blender Motor
______________________________
Description
The blender motor is the power supply for the
blender function.
Troubleshooting
If unit does not blend, check the following:
1. Power supply
2. ON-OFF/Reset button
3. Safety switch (hopper/cover)
4. Combination of drink sizes
5. Portion of product used for drink size
6. Blender pitcher for damage
7. Blender motor
8. Main power board
Note: See page 42 for Blender Motor
Troubleshooting Guide.
Disassembly
Step 1
Turn off the power switch and unplug the
power cord.
Step 2
Remove ice hopper and lid. (See page 17.)
Step 3
Remove the Drive Board. (See page 18.)
Figure 21
Step 4
Position the unit on its side as shown in Figure 22.
Figure 22
To Next Page
Loading...
