® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
23
PROGRAMMING
“AUTO-LOCK” FUNCTION
1. The door will be automatically locked within 10 to 99 seconds when “Auto-Lock” function is enabled.
2. The deadbolt comes with “Auto-Lock” function disabled from the factory.
3. “Auto-Lock” time delay is preset to 30 seconds. It can be adjusted to 10 to 99 seconds if needed.
4. The system will signal an operating error if the deadbolt fails to latch properly. Re-enter valid user
entry code to unlock the door and retract the latchbolt. “Auto-Lock” function is now restored.
FUNCTION STEPS
Auto-Lock
ON/OFF
Enter
Programming
Code
Press
“
5
”
Auto-Lock
Time Delay
Enter
Programming
Code
Press
“
6
”
Enter
Seconds
(10 to 99)
To Next Page
Loading...