Tazz 18493 User Manual (English)

Questions and Answers:

R
Rebecca HoffmanJul 27, 2025
How to start a Tazz Paper Shredder if the engine won't start?
- G
  Gabrielle WatersJul 27, 2025
  If the engine of your Tazz Paper Shredder won't start, several issues could be the cause: 1. The unit may be out of fuel, so add fuel. 2. The spark plug wire might be disconnected; reconnect it as directed in the engine manual. 3. Engine controls may not be set correctly; refer to the STARTING section in the engine manual. 4. The spark plug could be fouled. Remove, clean, or replace it following the engine manual's instructions. 5. If there's no compression and the recoil starter pulls without resistance, or if there's no spark due to ignition problems, or if the fuel is old or stale, it is recommended to see your authorized dealer or service center.
J
John SmithJul 31, 2025
Why is the engine exhaust black on my Tazz Paper Shredder?
- P
  paul79Aug 1, 2025
  If your Tazz Paper Shredder's engine exhaust is black, the possible reasons are: 1. A dirty air filter. Replace the air filter, referring to the engine manual. 2. The choke is closed. Open the choke.
D
daniel26Aug 6, 2025
What to do if my Tazz Paper Shredder engine runs but no material is discharged?
- M
  Mike LeonardAug 6, 2025
  If the engine of your Tazz Paper Shredder runs but no material is discharged, consider the following: 1. The discharge chute might be clogged. Clean out any debris. 2. The engine may not be running at full speed. If equipped, set the throttle control to FAST. For fixed throttle engines, it is recommended to see your authorized dealer or service center.
L
Laura Wilson MDAug 10, 2025
Why is my Tazz Paper Shredder making unusual noises or vibrating when chipping?
- J
  jessicajamesAug 10, 2025
  If you experience unusual noise or vibration when chipping materials with your Tazz Paper Shredder, here's what might be happening: 1. The rotor could be overloaded with material. Allow the unit to clear itself before adding more material to the hopper. 2. Hammers might be broken, bent, or loose. Check the assembly and tighten or replace parts as necessary. 3. Hammers could be frozen in place. Check for obstructions and debris, then repair or replace parts as needed.
L
lbranchAug 16, 2025
Why is the vacuum not working on my Tazz 18493 Paper Shredder?
- L
  Lacey JonesAug 16, 2025
  If your Tazz Paper Shredder vacuum is not working, consider the following: 1. The hopper gate may not be closed. Slide the gate to the closed position. 2. The cone cover may not be installed. Allow material to dry. 3. The hose might not be attached properly. Attach the hose per the instructions in the Hose Kit. 4. The hose could be obstructed or damaged. Clear any blockage or replace the hose. 5. The engine might not be running at full RPM. If equipped, set the throttle control to FAST. For fixed throttle engines, it is recommended to see your authorized dealer or service center.

Tazz 18493 Specifications

General

Brand	Tazz
Model	18493
Category	Paper Shredder
Language	English

Summary

INTRODUCTION

REGISTRATION AND SERVICE

Information on registering your product and obtaining technical support and service.

OWNERSHIP RECORDS

Section to record owner's name, address, model, and serial numbers for easy reference.

FEATURES & CONTROLS

Control Functions

Brief description of individual control functions and their operation.

SPECIFICATIONS

PARTS & ACCESSORIES

Information on replacement and optional accessories for the chipper shredder.

WARNINGS AND SAFETY PRECAUTIONS

Owner's Responsibility

Outlines the owner's responsibility for safe assembly and effective use of the chipper shredder.

Special Messages

Highlights potential safety concerns, machine damage, and operating/servicing information.

Important Safety Precautions

Crucial safety instructions and recommendations for operating the chipper shredder safely.

Intended Use / Foreseeable Misuse

Defines the chipper shredder's intended purpose and potential misuse scenarios.

SAFETY DECALS

DECAL - OPERATING INSTRUCTIONS

Details on safety labels providing operating instructions and warnings on the unit.

DECAL - Danger, Rotating Cutting Blades, Warning, Debris

Information on safety decals related to hazards like rotating blades and thrown debris.

GENERAL OPERATING SAFETY

PRODUCT-SPECIFIC SAFETY

Specific safety guidelines for operating the chipper shredder, including safe material feeding.

ENGINE SPECIFIC SAFETY

Preventing Carbon Monoxide Poisoning

Guidelines to prevent carbon monoxide poisoning from engine exhaust fumes.

Gasoline Fires and Handling Fuel Safely

BURNS AND FIRES

Precautions to prevent burns and fires related to hot engine parts and fuel.

CHILDREN AND BYSTANDERS

Safety measures to protect children and bystanders during operation.

ASSEMBLY

Install Kick Stand

Instructions for attaching the kick stand to the chipper shredder base.

Install the Wheels

Steps for securely mounting the wheels onto the chipper shredder axle.

Install Chipper Cone

Guide for attaching the chipper cone to the engine plate with flange nuts.

Install the Hopper Guard

Procedure for attaching the hopper guard assembly to the hopper.

Install Debris Bag

Steps for connecting the debris bag support rod and bag to the unit.

Install the Handle

Instructions for securing the hopper handle to the hopper.

GENERAL OPERATION

Chipper Operation

Guidelines for operating the chipper function with tree limbs and branches.

Shredder Operation

Instructions for shredding light brush, leaves, and organic waste.

Vacuum Attachment (Optional)

Details on using the optional vacuum kit for processing loose debris.

Operating Location

Recommendations for selecting a safe and suitable operating area for the unit.

Adding Fuel

Steps for safely adding fuel to the engine before starting operation.

Starting the Engine

Stopping the Engine

Procedure for safely shutting down the engine and stopping the rotor.

Processing Materials

Tips for efficiently processing various materials like branches and brush.

Storage

Procedures for storing the chipper shredder, including engine maintenance.

TRANSPORTING AND STORAGE

Guidelines for safely transporting and storing the chipper shredder unit.

CHIPPING AND SHREDDING RECOMMENDATIONS

MAINTENANCE

Schedule & Procedures

Maintenance schedule and procedures for normal care of the chipper shredder unit.

Engine Maintenance

Instructions for performing maintenance tasks on the engine as per the engine manual.

Check for Loose Hardware

Procedure for inspecting and tightening loose hardware on the unit.

Check Safety Labels

Guidance for checking the condition and placement of safety labels on the unit.

Inspect Cone, Hopper, & Guards

Instructions for inspecting the chipper cone, hopper, and guards for damage or security.

Clean Debris from Engine & Chipper

Inspect / Rotate Shredding Hammers

Procedure for inspecting and rotating the shredding hammers for optimal cutting.

INSPECT CHIPPING KNIVES

Check / Change Engine Air Cleaner

Procedure for inspecting and replacing the engine air cleaner filter element.

Replace Spark Plug

Recommendation to contact an authorized dealer for spark plug replacement service.

Oil Maintenance

Reference to the engine manual for detailed oil maintenance procedures.

TROUBLESHOOTING CHART

REPAIR

Shredding Hammer Rotation and Replacement

Detailed steps for rotating or replacing the shredding hammers on the unit.

Chipping Knives Sharpening and Replacement

NOTES

ILLUSTRATED PARTS BREAKDOWN

ILLUSTRATED PARTS BREAKDOWN - ENGINE AND ROTOR GROUP (MODEL 18493)

ILLUSTRATED PARTS BREAKDOWN - ENGINE AND ROTOR GROUP (MODEL 22752)

ILLUSTRATED PARTS BREAKDOWN - ROTOR GROUP

ILLUSTRATED PARTS BREAKDOWN - CHIPPER HOUSING GROUP

ILLUSTRATED PARTS BREAKDOWN - HOPPER GROUP

ILLUSTRATED PARTS BREAKDOWN - VACUUM KIT (OPTIONAL ACCESSORY) MODEL NO. 22518

ILLUSTRATED PARTS BREAKDOWN - TOW BAR KIT (OPTIONAL ACCESSORY) MODEL NO. 1692327

WARRANTY TERMS AND CONDITIONS

Limited 5 Year Chipper Shredder Warranty

Details the five-year limited warranty for the chipper shredder, excluding the engine.

Tazz 18493 User Manual

Table of Contents

Questions and Answers:

Tazz 18493 Specifications

Summary

INTRODUCTION

REGISTRATION AND SERVICE

OWNERSHIP RECORDS

FEATURES & CONTROLS

Control Functions

SPECIFICATIONS

PARTS & ACCESSORIES

WARNINGS AND SAFETY PRECAUTIONS

Owner's Responsibility

Special Messages

Important Safety Precautions

Intended Use / Foreseeable Misuse

SAFETY DECALS

DECAL - OPERATING INSTRUCTIONS

DECAL - Danger, Rotating Cutting Blades, Warning, Debris

GENERAL OPERATING SAFETY

PRODUCT-SPECIFIC SAFETY

ENGINE SPECIFIC SAFETY

Preventing Carbon Monoxide Poisoning

Gasoline Fires and Handling Fuel Safely

BURNS AND FIRES

CHILDREN AND BYSTANDERS

ASSEMBLY

Install Kick Stand

Install the Wheels

Install Chipper Cone

Install the Hopper Guard

Install Debris Bag

Install the Handle

GENERAL OPERATION

Chipper Operation

Shredder Operation

Vacuum Attachment (Optional)

Operating Location

Adding Fuel

Starting the Engine

Stopping the Engine

Processing Materials

Storage

TRANSPORTING AND STORAGE

CHIPPING AND SHREDDING RECOMMENDATIONS

MAINTENANCE

Schedule & Procedures

Engine Maintenance

Check for Loose Hardware

Check Safety Labels

Inspect Cone, Hopper, & Guards

Clean Debris from Engine & Chipper

Inspect / Rotate Shredding Hammers

INSPECT CHIPPING KNIVES

Check / Change Engine Air Cleaner

Replace Spark Plug

Oil Maintenance

TROUBLESHOOTING CHART

REPAIR

Shredding Hammer Rotation and Replacement

Chipping Knives Sharpening and Replacement

NOTES

ILLUSTRATED PARTS BREAKDOWN

ILLUSTRATED PARTS BREAKDOWN - ENGINE AND ROTOR GROUP (MODEL 18493)

ILLUSTRATED PARTS BREAKDOWN - ENGINE AND ROTOR GROUP (MODEL 22752)

ILLUSTRATED PARTS BREAKDOWN - ROTOR GROUP

ILLUSTRATED PARTS BREAKDOWN - CHIPPER HOUSING GROUP

ILLUSTRATED PARTS BREAKDOWN - HOPPER GROUP

ILLUSTRATED PARTS BREAKDOWN - VACUUM KIT (OPTIONAL ACCESSORY) MODEL NO. 22518

ILLUSTRATED PARTS BREAKDOWN - TOW BAR KIT (OPTIONAL ACCESSORY) MODEL NO. 1692327

WARRANTY TERMS AND CONDITIONS

Limited 5 Year Chipper Shredder Warranty

NOTES