What to do if the service battery voltage is low on my TBB Power Supply?
If you're experiencing a low service battery voltage with your TBB Power Supply, the suggested solution is to check the battery and replace it if necessary.
What to do if my TBB Power Supply shows an LMP-PWM unit Over temp error?
If your TBB Power Supply indicates an 'LMP-PWM unit Over temp' error, allow the unit to cool down before resuming operation.
How to fix a bulk charge timeout on a TBB Power Supply?
If you're encountering a bulk charge timeout issue with your TBB Power Supply, investigate the charging cycle and adjust it as necessary.
General| Brand | TBB |
|---|---|
| Model | idSWITCH LMP1218-PWM |
| Category | Power Supply |
| Language | English |
Guidelines for qualified personnel regarding unit safety, opening, and repair procedures.
Indoor use, ventilation, cable selection, flammable goods, and placement guidelines.
Safety measures for handling battery acid, flammable gases, metal tools, and personal metal items.
Overview of features like smart battery charging, multiple inputs, and control functions.
Description of LED indicators (CHG, Dischg, CHG/Dischg) and their status meanings.
Explanation of priority for power sources like AC Mains, Solar Panel, and Alternator.
Details on the microprocessor-controlled charging algorithm and stages for auxiliary batteries.
Operation as a power supply and details on the built-in PWM solar charger.
Functionality of VCR for alternator power supply based on battery voltage.
Low Voltage Protection (BLVP) and Manual Battery Switch functions.
Schematic diagram of the DC distribution network and connected loads.
Description and identification of front and back connectors for various inputs and outputs.
Recommendations for proper unit installation and ensuring adequate ventilation.
List of fuses installed on the LMP1218-PWM unit with their ratings.
Setting battery type, VCR mode, and working mode using dip switches.
Connecting an external switch for remote control of auxiliary battery output.
Routine checks and procedures for unit and battery maintenance.
Table detailing LED error indications and their corresponding fault conditions.
To Next Page