Main
Power
Switch
Hi-Z
Unbalanced
Inputs
Balanced
Outputs
Serial no.
S/PDIF
Digital
In/Out
MIDI
In,Thru,Out
External
Control
Input
Notes:
The G-Force Input jacks are unbalanced. The Output jacks are balanced.
If you are connecting the Outputs via stereo jacks to unbalanced equipment, you must tie ring and sleeve
together in the cable ends away from the G-Force.
You can always use standard mono guitar cables to connect G-Force.
External control input can use momentary, alternating and continuous type pedals.
The G-Force power supply is capable of operating at any line voltage from 100-240 Volts, 50-60Hz.
THE REAR PANEL
10
To Next Page
Loading...
