TC Electronic PolyTune - Battery Management and Memory; Persistence of Settings; Battery Replacement Procedure; Battery Safety and Disposal

15
PolyTune™remembersthelastusedsettings,evenifthepowerhasbeendisconnectedorthe
battery has been removed.
Changing battery-Unscrewthethumb-screwonthebackofthepedalanddetachthebackplate.
Unmounttheoldbatteryandattachthenewbatterytothebatteryclipmakingsurethepolarityis
correct.Thenremountthebackplate.Tosavebatterylife;removetheinputjackwhenyoudon’tplay.
Batteries must never be heated, taken apart or thrown into fire or water. Only rechargeable
batteries can be recharged. Remove the battery when the pedal is unused for a longer period of
time. Dispose batteries according to local laws and regulations.
Low battery indication - When the battery runs low on power the display occasionally indicates this by
writing“BATT”.