TC-Helicon PERFORM-VG Quick Start Guide

Quick Start Guide
PERFORM-VG
Ultra-Simple Mic-Stand-Mount Vocal and
Acoustic Guitar Processor for Solo and Duo Performers
You will need
! Mute mixer when connecting
“SET” FLASHES WHEN COMPLETE
Tone adds dynamic EQ, compression, de-essing,
and gating to your voice.
Press and hold the TONE button, then adjust
the amount of pitch correction with the
control knob.
Anti-Feedback helps to eliminate squealing
from your speakers using EQ and auto
level control.
Engage the BodyRez e ect to greatly improve
the sound of your guitar’s pickup.
Press the MIX button to adjust the balance of
vocal and guitar signals sent to the MIC OUT
jack. Press and hold the MIX button to enter
talkback mode to bypass FX and access the
guitar tuner.
Note: Connecting a cable to the THRU
jack removes the guitar signal from the
MIC OUT jack.
OR
OR
x2
x2
12V1A
VOLUME
+
SET GAIN
+
SING LOUD!
HOLD 2 SEC
VOCAL FX ON/OFF
Dim = OFF
White = ON
GUITAR FX ON/OFF
TONE / PITCH
ANTI-FEEDBACK
BODYREZ
MIX / TALK / TUNER

TC-Helicon PERFORM-VG Specifications

General

Brand	TC-Helicon
Model	PERFORM-VG
Category	Recording Equipment
Language	English