Need help?Do you have a question about the TC-Helicon PERFORM-VE and is the answer not in the manual?
General| Brand | TC-Helicon |
|---|---|
| Model | PERFORM-VE |
| Category | Recording Equipment |
| Language | English |
Instructions for updating Perform-VE firmware using VoiceSupport 2.
Details the Set button's roles in mic gain, MIDI settings, and preset configurations.
How to set the MIDI channel for controlling Perform-VE with MIDI notes.
Enabling and explaining the Adaptive Tone effect (EQ, Compression, De-Ess, Gate).
How to enable +48V Phantom Power for condenser microphones.
Choosing Chromatic, Pop Major scales, or NaturalPlay for pitch correction.
Adjusting the intensity of pitch correction from Natural to Slammed!
How to arm, record, and set loop points for drum patterns.
Steps to record and set loop points for audio loops, including overdubbing.
Instructions on how to erase individual loop components or the entire loop.
Adjusting drum loop volume and selecting different kick drum samples.
Enabling/disabling quantization for drum events to control groove tightness.
Explains the four sample playback modes: Re-trigger, Legato, Looped Re-trigger, Looped Legato.
How to save current effect settings as one of the three onboard presets.
Connecting external stereo audio sources for backing tracks and aux-to-main routing.
Information on USB audio input/output channels, driver requirements, and audio routing.
A comprehensive list of Continuous Controller (CC) messages and their corresponding Perform-VE parameters.
Instructions to reset the Perform-VE unit back to its factory default settings.
To Next Page
