Need help?Do you have a question about the TC-Helicon Ditto and is the answer not in the manual?
General| Looping Time | 5 Minutes |
|---|---|
| Unlimited Overdubs | Yes |
| True Bypass | Yes |
| Analog Dry-Through | Yes |
| Type | Looper |
| Power Supply | 9V DC (center negative) |
| Inputs | 1 x 1/4" Instrument |
| Outputs | 1 x 1/4" Instrument |
| Channels | 1 |
Connection point for the included power supply unit.
Standard XLR input for connecting a microphone directly or via effects.
Standard XLR output for connecting to a PA system or mixer.
Controls loop functions: record, playback, undo/redo.
Stops loop playback or clears the entire loop.
Step-by-step guide to download, prepare, and transfer firmware updates to the Ditto Mic Looper.
To Next Page