Need help?Do you have a question about the TC-Helicon GO XLR and is the answer not in the manual?
General| Frequency range | 10 - 20000 Hz |
|---|---|
| Channels quantity | - channels |
| Supported sample rates | 48 kHz |
| Digital sound processing | 24 bit |
| Line Signal-to-Noise Ratio (SNR) | 101 dB |
| Equalizer bands quantity | 4 |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Number of microphone inputs | 1 |
| DJ mixer | - |
| Product color | Black |
| USB connector type | USB Type-B |
| Fuse | 1 A |
| Phantom power | 48 V |
| Power consumption (typical) | 10 W |
Weight and Dimensions| Depth | 174 mm |
|---|---|
| Width | 285 mm |
| Height | 82 mm |
| Weight | 1550 g |
Comprehensive safety instructions and precautions for using the GO XLR device.
Steps to download and install the essential GO XLR application and drivers.
Instructions for obtaining the latest GO XLR app from the official website.
Connecting the GO XLR to your computer and power source.
Basic hardware and connection requirements for a one-PC streaming configuration.
Step-by-step guide for connecting microphones, headphones, and auxiliary devices.
Adjusting microphone input gain and monitoring levels in the GO XLR app.
Applying equalization, compression, gating, and de-essing for vocal enhancement.
Setting up playback devices for different audio streams like Chat, Game, Music, and System.
Recommendations for assigning System and Chat channels as default devices.
Configuring recording devices for Broadcast Stream Mix, Chat Mic, and Sample audio.
Introduction to the app's main areas: Profile/Sample/Preset Management, Live View, and Processing Tabs.
To Next Page
