25 GO XLR User Manual
11. Global, FX & Sampler Lighting
The GO XLR app gives you detailed custom control over the color and appearance of the GO XLR panel. You can assign colors for dierent functions and states, such as
whether a Sample Pad has a sample loaded, is actively playing back, is stopped, and so on.
Within the Lighting section of the lower System tab, you can a assign a single overall color for the GO XLR panel, customize the accent light color (the “X” in the GO XLR
logo and the interior LEDs inside the ventilation grille), assign a color to the !@#$* or “bleep button,” and set up a custom color for the Cough button.
Global color settings under the System tab
11.1 Globally Assigning Colors
GO XLR can be set up with a single color as the overall, dominant “look” of
the unit.
GO XLR panel with red global color scheme
To assign a global, overall color scheme for GO XLR, follow these steps:
1. Click on the System tab in the Control Tabs area at the bottom of the GO XLR
app screen.
2. Click on the Lighting option.
3. Under Item, click on the Global option.
4. Under Color 1, select a color from the options shown on the palette.
Whenever you select a new color, the GO XLR panel will immediately change
to show the new color.
NOTE: Only one Global and Accent color may be selected, so the Color 2 option
will be grayed out and non-functional for the Global lighting section.
GO XLR panel with blue global color scheme
To Next Page
Loading...
Need help?
General
Weight and Dimensions
