TC-Helicon VoiceLive 3 Reference Manual

Setup
VoiceLive 3 – Reference manual (2014-03-29) 104
Gate parameter
The gate turns down the volume of the micro-
phone/line signal when the input signal falls un-
der a certain threshold.
Use the Gate parameter to choose between
adaptive (automatic) and manual compression.
Parameter settings:
– Off: No Gate is applied.
– Adaptive: The Gate is adjusted automatically.
– Manual: The Gate threshold can be set by
the user.
Lead Atten(uation) parameter
(Adaptive and Manual
Gate mode only)
Use the Lead Atten(uation) parameter to set the
attenuation of the lead voice once the signal falls
under the threshold.
Harm(ony) Atten(uation)
parameter (Adaptive and
Manual Gate mode only)
Use the Harm(ony) Atten(uation) parameter to set
the attenuation of the harmony voices once the
signal falls under the threshold.

TC-Helicon VoiceLive 3 Specifications

General

Outputs	XLR, 1/4"
MIDI	In/Out
USB	USB for audio I/O and firmware updates
Inputs	XLR, 1/4"
Power Supply	External power supply (included)