The Looper
VoiceLive 3 – Reference manual (2014-03-29) 84
– Now, tap Swap. You will see in the display that
Loop track C continues to play until it reaches
its end, then VoiceLive3 automatically switch-
es to Loop B!
Press ALL STOP to stop recording
– Stop loop playback by pressing ALL STOP
(HIT footswitch).
This completes our tutorial.
The Utility menu
We will now explore the UTIL(ity) menu, where
you will find many of the Looper options.
– Tap the footswitch linked to the Utility menu
(the µMod footswitch) to enter the Utility menu.
– If you see “SWAP” in the top left menu seg-
ment, press and hold the µMod footswitch to
enter the Utility menu. This press/hold action
is designed to allow the Swap button to do
double duty, depending on whether you have
a “B” and “C” loop recorded.
Once you have entered the UTIL menu, you
will see several new menu options.
Utility menu
Back
Tap BACK (µMod footswitch) to move “up” from
the Utility menu or one of its sub-menus until you
are back on the main loop screen.
To Next Page
Loading...
Need help?
General
