TC-Helicon VoiceLive 3 Reference Manual

Setup
VoiceLive 3 – Reference manual (2014-03-29) 106
Warmth parameter (Adaptive
EQ mode only)
Use the Warmth parameter to adjust the charac-
ter of adaptive equalization. When you set it to
On, the equalization will sound warmer.
Low / Mid / High gain parameters
(Manual EQ mode only)
Use the Low, Mid and High Gain parameters to
set the amount of signal boost (gain) or attenu-
ation that should be applied to the low, mid and
high bands of the EQ.
Parameter range: -12 to 12dB.
Low / Mid / High Freq(uency)
parameters (Manual EQ mode only)
Use the Low, Mid and High Freq(uency) param-
eters to set the frequencies of the low, mid and
high bands of the EQ.
Parameter range: 20 to 20480Hz.

TC-Helicon VoiceLive 3 Specifications

General

Outputs	XLR, 1/4"
MIDI	In/Out
USB	USB for audio I/O and firmware updates
Inputs	XLR, 1/4"
Power Supply	External power supply (included)