TC-Helicon VoiceLive 3 Reference Manual

VoiceLive3 overview
VoiceLive 3 – Reference manual (2014-03-29) 25
Stereo PA connection for vocals (and guitar if applicable)
This diagram shows a “Stereo” output mode.
Stereo sends a Left and Right signal via the XLR
outputs to your PA or mixer.
This allows you to enjoy the full benefits of stereo
audio effects.
Setting Output Mode to Stereo
Changing VoiceLive3 from Mono
(default) to Stereo output:
– Press Setup.
– Use the < or > Arrow buttons to move to the
Output page.
– Use the Control Knob to move the selection
bar until Output Mode is highlighted (white).
– Turn the Mix Knob directly below the Out-
put Mode box on the screen until the mode
changes to Stereo.
– Press Home to exit.
– When choosing Stereo, ensure the PA is ac-
tually outputting a stereo signal. It’s common
for a PA to have 2 speakers but still be mono.

TC-Helicon VoiceLive 3 Specifications

General

Outputs	XLR, 1/4"
MIDI	In/Out
USB	USB for audio I/O and firmware updates
Inputs	XLR, 1/4"
Power Supply	External power supply (included)