2. Press Record again to continue playback without recording or
continue recording layers.
Holding the left arrow will undo the previously
recorded layer. Holding it again will undo the previous undo (or redo).
Holding the right arrow copies and doubles the length of the loop so
you can record a longer phrase over a shorter repeating loop beneath
it. This can be repeated until the memory fills.
Holding the Record button will erase the entire loop including loop
points and is not undo-able.
More detailed information on basic looping as well as the
advanced Loops and Shots modes can be found on the VoiceLive Touch
support page on the TC-Helicon website.
EDITING PROCEDURE
To make changes in an edit menu
1. Hold an Effect block button, Voicing button or the Mix button to
enter its edit menu.
2. Tap an Arrow button to browse up or down through the
parameters in the menu. The parameter name and value will
scroll across the display. This prompt can be recalled by tapping
the Slider.
3. When you have found the parameter you want to change, swipe
quickly or drag along the Slider.
To store edits to a Favorite, hold any Favorite button.
To finish editing and return to performance mode, double tap the Slider.
EFFECT EDIT PARAMETERS
The following lists the editable parameters by effect. Hold any effect
button to enter its edit menu.
1 Level - Sets amount of effect in the mix.
2 Style - Selection of 24 factory-configured effect types.
3 Lead Level - Lowers lead (dry voice) when the effect is the only one
active. Useful for 100% wet effects when needed.
1 Level - Sets amount of effect in the mix.
2 Style - Selection of 18 factory-configured effect types.
3 Lead Level - Lowers lead when only the Delay is active.
4 Width - Some styles have stereo panning. This sets how wide they
Basic Operations
10
To Next Page
Loading...
Need help?
General
