Name: TC-Helicon VoiceTone Harmony-G
Brand: TC-Helicon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Step 9:

Slowly raise the fader on your mixer channel as you sing

into your mic. Once you’ve reached a comfortable

listening level you should hear your voice clearly with

some reverb effect added.

It’s important to take a moment and tune your guitar

before checking out the harmonies. Hold the On button

to enter Harmony-G’s Tuner/Bypass mode. Pluck a single

string at a time to see its pitch.You will see which note

it’s closest to in the Preset display and whether the string

is sharp or flat in the LED bank above the FX and Voice

1 and Voice 2 buttons. Adjust each string until they’re all

in tune.

Now you’re ready to hear Harmony-G’s harmony

voices. Press the On footswitch and sing a song you

know while strumming the guitar chords to the song.

Remember that your guitar directs the harmonies so

ensure that your guitar volume control is turned up.

Quick Start

You can now experiment with all of Harmony-G’s

features starting by pressing the Preset button to load

the different presets and then pressing the A/B

footswitch to hear each preset’s A and B settings.

Please read this short manual to ensure you get the

most from Harmony-G!

Questions and Answers:

Need help?

Do you have a question about the TC-Helicon VoiceTone Harmony-G and is the answer not in the manual?

TC-Helicon VoiceTone Harmony-G Specifications

Analog Inputs

mic input impedance	1 kOhm
mic input sensitivity at 0dBFS	-44 dBu to +2 dBu
mic input sensitivity at 12dB headroom	-56 dBu to -10 dBu
guitar input impedance	1 MOhm
guitar input sensitivity	+15 dBu at 0dBFS
equivalent input noise	-126 dBu at max. mic amp gain, Rg = 150 Ohm

Analog Outputs

main output impedance	40 Ohm
main output level	+2 dBu at 0dBFS
guitar thru output impedance	270 Ohm

Input to Output Analog Audio Performance

dynamic range, mic at min gain	>108 dB, 20 Hz - 20 kHz A-weighted
dynamic range, mic at -18 dBu sensitivity	>104 dB, 20 Hz - 20 kHz
thd+ noise, mic at min gain	<-90 dB
frequency response at max gain	-1.5 dB at 40 Hz, +0/-0.3 dB (200 Hz to 20 kHz)
guitar in to thru dynamic range	>119 dB
tuning mute attenuation	>100 dB

Conversion Characteristics