10
The indicator light flashes yellow
and the 3 lower buttons flash white.
14. Press the caffè crema button.
The pump starts to operate.
The pump will flush cold water
through the pipes, which will
run into the cup underneath.
You will then hear 2 beeps.
The indicator light goes out.
All buttons will flash; the machine
is heating up to make a beverage.
The machine will beep once it has
heated up. The 6 buttons will light
up continuously.
15. Press the milk system rinse
button briefly to rinse the
pipes/connection tubes to
the milk container.
Rinsing takes approx. 50 seconds.
You will then hear 2 beeps.
16. Pour the water out of the
cup underneath.
17. Pull the milk container straight
out towards you to remove it
from the machine.
18. Clean the milk container as
described in the section titled
“Cleaning”.
19. Rinse out the machine twice
as described in the sectioned
titled “Rinsing the machine”.
The machine is then ready
for use.
To Next Page
Loading...
