9
5. Make sure that the milk container
is inserted all the way into the
machine connection point.
6. Pull the water container straight
upwards to remove it from the
machine.
7. Clean the water container
as described in the section
titled “Cleaning”.
8. Then fill the water container
with fresh, cold tap water
or drinking water up to the
MAX mark.
9. Reinsert the water container into
the machine. Press it down as far
as it will go.
10. The lever must be folded down.
Fold it down if necessary.
11. Place an empty cup underneath
the coffee spout.
12. Plug the mains plug into an
easily accessible wall socket.
13. Press any button briefly
to switch on the machine.
You will hear a short beeping
sound.